Видео

It would be helpful if you could leave links to where you got that screw replacement. Thank you for the video though, this is very helpful.

Excellent video tutorials, a great help! Thankyou.

Excelente

Could you replace AA filter on sony A6xx seri camera ?

on my lens the af is ok but when using manual focus it does not rotate easily needs more rotation for the focus meter to rotate also

Hi there folks is a canon 24-105mm f1.4L lens Image stabilization Flex version 1 same with the newer version 24-105mm f1.4L ll? Mine was broken.. your advice is much appreciated. Thanks. In advance

Does in your case autofocus work ? or both focus options was compromited? and you just glued that broken plastic frame to the bolt???

is there a video for slipping focus on manual focus repair ???

Thank you for the video, I mannaged to repair the broken barrel but since, I can't have control on aperture anymore. It's stuck at F0 and the autofocus don't work anymore too. Any idea of what I did wrong ?

I have some dust inside the lens and one large spec on the smaller lens inside. Can you take the front lens off and blow it out?

Our problem is the m6 mark 2 the cmos battery has no charge and keeps resetting time and date during the main battery swap and yes I have always used Canon branded Batteries. Did you find a cmos battery when you took apart your m6?

Hi, thanks for the video! I found an extra cheap replacement dial listing where the metal plate is not included. Do you think it's possible to transfer the original plate to the new dial? Or is it safer to pay double for the whole assembly

It would have been helpful to show us how you replaced the SD card reader. It looks to me as if this would have required expert resoldering skills at the microscopic level. It's one thing to pull a camera apart, but it is at a whole new level of expertise to do motherboard repairs. I was quite disappointed that you just skipped past the most crucial part of this repair.

where can I buy the frame and 1G lens group?

Hello i have the same one but lately it shows everything blurry idk if it is because it fell a 20cm fall or because i avcidently rotated it strongly. Please tell me what i can do

I'm trying to find the part online, I accidentally ripped the flex ribbon cleaning the camera, where do I find the right part online?

My copy of this lens has a squeak when it focuses. What do you think the cause and fix would be?

Cách thay màn như thế nào vậy

Hello sir, do you have experience with a Panasonic DMC-G7? I'm trying to replace the LCD. I can get the unit off, but I can't remove the LCD from the back cover. I have replaced the hinge and flex cable however I still don't get any display on the LCD.

Hello sir, do you have experience with a Panasonic DMC-G7? I'm trying to replace the LCD. I can get the unit off, but I can't remove the LCD from the back cover.

Fu

Thank you for the video, Question, did you use any tools to identify the bad components or were they just loose / burnt? Still trying to learn PCB repair.

fixed my one, had the issue that the USM motor was working but not moving the lens unit, aswell when you moved the focusring. In think the "driving fork" or how it's name was somehow disengaged? do you know about such issue?

Very nice! I did this today (but only for dust removal) and everything went according to plan until I accidentally loosened the aperture blade so they fell out of position and now I can't figure out how to take out the actual aperture plate, so I can put them back into position. Do I need to disassembly the lens from the back to be able to do that?

Lifesaver my friend!

Or maybe, the two spring clips behind the auto and manual switch have become unaligned and it won’t lift the gear high enough to disengage. Stripped it twice using this vid to find I only had to go 1/4 disassemble to fix it…

How can I buy a vc module with diafram and how much it costs? I, m from Brazil and my lens works except that I can't see diference on the viewfinder turning on or off the vc switch I use an R7 and R5.

This is EXACTLY what's happening to my lens! Do you know what causes the issue?

Gracias desde la ciudad de México

do you still do this?

You really just gloss over how to deal with the long tabs at about the 4:25 mark huh

Just buy a new wheel, they’re not that expensive. Gluing this together is bs

Will it still be protected against rain after the repair?

Do you know how to take rear glass off? I need to clean it on the other side

Is there a problem to fix a 70-300 where the zoom is stuck? The lens is at its shortest when on 300, so the "tube" seems to be stuck somehow... The focusing works.

I have one that just gave out on me the bmpcc og recently wont turn on or charge any help?

My lens! :D I've lost most of the parts but I'm curious

j'ai oubié de précicer qu'il sagit du 3ools CANON COMMENTAIRES CI DESSOUS

Bonjour est ce quelqu'un pourrait me donner des conseils pour démonter la lentille du dessus au niveau du pare soleil est ce qu'il faut un outil spécial MERCI

Thank you for the video, there are not many skilled technicians willing to share the knowledge.

good video👍

I just replaced a broken rotating hinge on my Daughter's 77d, by replacing the hinge/cable....and after putting it all back together, it won't switch on... FMCanon 77dL...! 🙄😆 Ps: Great videos btw... 👌🏽

Please, I own the second generation lens. I have a problem when I shoot at 2.8. It does not give good details and clarity except when I shoot at f:5.0. What is the problem?

من فضلك انا امتلك عدسة الاصدار الثاني 200-700 لدي مشكلة اثناء قيامي بالتصوير على 2.8 لا تعطي تفاصيل ووضوح جيدة الا عندما اقوم بالتصوير على فتحة عدسة f:5.0 ماهي المشكلة

I have a fungus on my sensor, nikon z6, I don't know if it's inside the sensor or in any of the filters, do you know if that can be cleaned?

This video helped me alot, thank you very much. but after fixing the parts the focus is not working anymore in manuel or af, is it a calibration issue? I can hear the focus motor working but nothing changes when I look through the lens.

Hello, 10:32 second into your film, during your reassembly, you use a Q tip…which has a purple side and a white side. What do you have on your q tip? I’m new to this whole subject of lens repair….and any help / knowledge would be greatly appreciated! Thank you for your help, Sincerely, Joshua

Hi where do you buy screwdriver? I bought from home depot tiniest ones but still having hard time to unscrew here. Please help

I wish there was a narrative instead of music...

where can I get the solenoid? I searched on eBay and Aliexpress but didn't find same one as your video.